Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the woodmart domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /home4/viaaqua0/public_html/wp-includes/functions.php on line 6114

Warning: Cannot modify header information - headers already sent by (output started at /home4/viaaqua0/public_html/wp-includes/functions.php:6114) in /home4/viaaqua0/public_html/wp-includes/feed-rss2.php on line 8
MARINE REEF SALT AND SUPPLEMENTS – Technological Aquatic Associated Manufacturing https://viaaqua.net Fri, 24 Mar 2023 09:08:50 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 https://viaaqua.net/wp-content/uploads/2020/10/cropped-logo-icon-32x32.png MARINE REEF SALT AND SUPPLEMENTS – Technological Aquatic Associated Manufacturing https://viaaqua.net 32 32 Portable Refractometer https://viaaqua.net/product/portable-refractometer Fri, 24 Mar 2023 09:08:49 +0000 https://viaaqua.net/?post_type=product&p=7495
  • Most reliable and accurate reading for salt contains
]]> Item No. Description UPC No. PR-S1 Portable refractometer 00690372485 2 ]]> Magnesium (Mg) https://viaaqua.net/product/magnesium-mg Fri, 24 Mar 2023 09:07:27 +0000 https://viaaqua.net/?post_type=product&p=7492

  • Models:

    Item No. Description Qty. Per Case Weight UPC No.
    OPP-M1 1 lb. jar Magnesium
    Case Dimension:
    16″ x 12″ x 5.2″    		 12 pcs. 14 lbs/case 006903728898

  • Instruction:

    1. Maintain magnesium level at approx. 1350 to 1450 ppm.
    2. For a 50 gallon aquarium, dissolve one teaspoon of Oceanpure™ Magnesium in one cup of water. Add mixture a little at a time into the aquarium.
    3. When adding the pre-mixed water to your aquarium, it is important to check the magnesium and calcium levels several times during this process. Each aquatic environment is different and the magnesium amount needed will vary.
    4. More magnesium may be needed depending on the condition of the aquarium. Never add more than a teaspoon per day to a 50 gallon aquarium.
    5. Please check your magnesium concentration with a good and reliable test kit.

  • Active Ingredients:

    • 98% pure magnesium salt
    • ]]>         Reef Calcium (Ca) https://viaaqua.net/product/reef-calcium-ca Fri, 24 Mar 2023 09:05:25 +0000 https://viaaqua.net/?post_type=product&p=7489

  • Models:

    Item No. Description Qty. Per Case Weight UPC No.
    OPP-C1 1 lb. jar Calcium
    Case Dimension:
    16″ x 12″ x 5.2″    		 12 pcs. 14 lbs/case 006903728904
    OPP-C4 4 lbs. jar Calcium
    Case Dimension
    16″ x 12″ x 8 “    		 6 pcs. 26 lbs/case 006903728911

  • Instruction:

    1. Keep calcium level approx. 400 to 430 ppm for the best coral growth.
    2. For regular maintenance in a moderate stocked coral aquarium, dose one level teaspoon per week in a 50 gallon aquarium.
    3. Please check your calcium concentration with a good, reliable calcium test kit.
    4. Strontium, magnesium, sodium, bromide, and sulfate maybe needed for a well-balanced reef aquarium.

  • Active Ingredients:

    • Calcium
    • Mild natural trace elements
    • ]]>         PRO Marine Reef Salt https://viaaqua.net/product/pro-marine-reef-salt Fri, 24 Mar 2023 09:03:58 +0000 https://viaaqua.net/?post_type=product&p=7486
  • Phosphate and nitrate free
  • Enhanced with additional calcium, magnesium, and strontium
  • For thriving reef/marine environments
  • Contains all essential vital trace elements
    • ]]>

  • Specifications：New Professional Grade!
    Oceanpure™ PRO Marine Reef Salt is an advanced formula, enriched with calcium, magnesium and strontium. It offers an important benefit over natural sea salt by allowing greater control over water quality and helping to combat unwanted bacteria, nitrate, phosphate and other unwanted metal
    build-up. Use Oceanpure™ PRO Marine Reef Salt to achieve proper pH, calcium, magnesium and strontium levels and promote healthy coral reef growth and color.

  • Models:

    Item No. Description Master Pack Qty.Per Pallet Weight Approx.
    Per Case, Per Palle    		 UPC No.
    0069037
    OPP-25 25 gal. mix/bag Case Dimension:
    16″ x 12″ x 7.5″    		 6 63 cases 42 lb/case
    2796 lb/pallet    		 2830 0
    OPP-50 50 gal. mix/bag Case Dimension:
    23.5″ x 12.75″ x 4.75″    		 3 60 cases 42 lb/case
    2670 lb/pallet    		 2831 7
    OPP-150 150 gal. mix/bucket Case Dimension:
    12″ x 15″    		 1 45 buckets + 12 boxes of 50 gal. 42 lb/case
    2670 lb/pallet    		 2832 4
    OPP-200 200 gal. mix/box
    (4 x 50 gal. bag) Case Dimension:
    16″ x 14″ x 8 “    		 1 45 cases 56 lb/case
    2670 lb/pallet    		 2833 1
     Special Order  Institutional size available – 1 ton bulk pack

  • Instructions:AQUARIUM WATER CHANGE RECOMMENDATION:

    1. Ideally, replace 10 – 20% of your aquarium water weekly, or biweekly with non-chlorinated, aerated salt water.
    2. Prepare new water in a separate container. Never mix salt in an aquarium containing animals. Always use clean non-toxic utensils.
    3. Heat the mixed salt water to within 1 – 2 degrees of aquarium temperature 24 hours before using.
    4. If your marine aquarium requires more than 50% water change at any time, be sure to
      prepare the water 24 hours before using. Mix water to your desired specific gravity
      to 1.020-1.026.
    5. To reduce undesirable mineral levels, it is highly recommended to use deionized or
      reverse osmosis water to prepare your salt water.
    6. When using dionized water, test for low pH and adjust it with buffer if needed.
    7. Guidelines for making saltwater at the recommended salinity of 1.024, use approximately 4.5 oz. for 1 gallon of water at 72F.
    • ]]>         Synthetic Sea Saltv https://viaaqua.net/product/synthetic-sea-saltv Fri, 24 Mar 2023 08:59:50 +0000 https://viaaqua.net/?post_type=product&p=7483
  • Nitrate Free
  • Phosphate free
  • Reef/marine environments
  • Fast dissolving
  • Contains all essential vital trace elements
    • ]]>

  • Specifications：Oceanpure™ Synthetic Sea Salt is among the finest salt in the market today. Specially formulated with required levels of calcium, magnesium and strontium. Oceanpure™ Synthetic Sea Salt was develop to meet standard of requirements for the reef and captive marine animal environments. All ingredients used are pharmaceutical grade and are free of phosphate, nitrate and contaminant ingredients. Oceanpure™ Synthetic Sea Salt dissolves quickly to create a vibrant and crystal clear aquatic environment second to none.

  • Models：

    Item No. Description Master Pack Qty. Per Pallet Weight Approx. Per Case Per Pallet

    UPC No. 0069037
    Description
    OP-25

    25 gal. mix/bag Case Dimension:
    16″ x 12″ x 7.5″

    		 6 63 cases 42 lb/case
    2796 lb/pallet    		 1445 7
    OP-50 50 gal. mix/bag Case Dimension:
    23.5″ x 12.75″ x 4.75″

     

    		 3 60 cases 42 lb/case
    2670 lb/pallet    		 1446 4
    OP-150 150 gal. mix/bucket Case Dimension:
    12″ x 15″    		 1 45 buckets + 12 boxes of 50 gal. 42 lb/case
    2670 lb/pallet    		 1447 1
    OP-200 200 gal. mix/box
    (4 x 50 gal. bag) Case Dimension:
    16″ x 14″ x 8 “    		 1 45 cases 56 lb/case
    2670 lb/pallet    		 2789 0
     Special Order  Institutional size available – 1 ton bulk pack

  • Instructions：

    AQUARIUM WATER CHANGE RECOMMENDATION:

    1. Ideally, replace 10 – 20% of aquarium water weekly or biweekly with non-chlorinated, aerated water.
    2. Prepare new water in a separate container. Never mix salt in an aquarium containing animals. Always use clean non-toxic utensils.
    3. Heat water to within 1-2 degrees of aquarium temperature 24 hours before using.
    4. If you aquarium requires more than 50% water change at any time, be sure to prepare the water 24 hours ahead before using. Set specific gravity to 1.020-1.026.
    5. To reduce undesirable mineral levels it is best to use deionized or reverse osmosis water as your salt mixing water.
    6. When using dionized water, test for low pH and adjust it with buffer if needed.
    7. Guidelines for making saltwater at the recommended salinity of 1.024, use approximately 4.5 oz. for 1 gallon of water at 72F.
    • ]]>