-
Models：
Item No. Dimension Aquarium Size Wattage UPC No. VA 50TH 1 x 1 x 8 in 50 Liters / 13 Gallons 50 watt 006903733342 VA 100TH 1 x 1 x 8 in 100 Liters / 25 Gallons 100 watt 006903733359 VA 200TH 1 x 1 x 10 in 200 Liters / 50 Gallons 200 watt 006903733366 VA 300TH 1 x 1 x 11.5 in 300 Liters / 80 Gallons 300 watt 006903733373 -
Part List：
- Sensor
- Heating element
- Temperature control
-
Installation：
DownloadTitanium Heater Instructions. 
Get Adobe® Acrobat Reader. Click here to download. If you have problem opening PDF file from Internet Explorer,
please try Firefox or right click on the link and select Save Target As and save the PDF file in your computer. -
Precaution：
PRECAUTION AND SAFEGUARD
Before installation of the ViaAqua® Titanium Heater, read and follow these important warning and safeguards.- Always disconnect the heater from the power supply prior to maintenance of the aquarium.
- When removing the heater from the aquarium the heater must be unplugged for 30 minutes prior to removal.
- Heater and the sensor must be submersed in the same body of water
- Plug only into a GFCI (Ground Fault Circuit Interrupter). The national code requires that a GFCI be used in the branch circuit supplying power to all water pumps and electrical aquarium equipment.
- Do not plug into an extension cord/power strip.
- Do not operate the heater if any of the cords are damaged.
- Do not operate the heater out of water.
- The temperature controller must not come in contact with water and/or moisture.
- For indoor household use only.
This product may contain chemicals known to the state of California to cause cancer and or birth defects or other reproductive harm. Wash your hand after handling this product.
It is your sole responsibilities to verify that the plug and the receptacle are clean and free of moisture and salt build up at all times. The receptacle must be free of water, salt, calcium, magnesium and dust. Failure to do so can cause fire, damage to property, permanent damage to the product and personal injury not limited to loss of life.
Do not plug into extension cord/power strip.
A drip loop must be used when plugging all electrical aquarium devices. A drip loop is that part of the cord hanging below the receptacle.
The national code requires that a GFCI (Ground fault circuit interrupter) be used in the branch circuit supplying all power to water pumps and electrical aquarium equipment. If you do not have a GFCI, have an electrician install one prior to operating any aquarium component.
Additional Safety Precautions & Warnings: Age Recommendation: 18 years or over. Not a toy. Not intended for use by children without direct adult supervision. As the user of this product, you are solely responsible for operating it in a manner that does not endanger yourself and others or result in damage to the product or the property of others.
FOR HOUSEHOLD USE ONLY.
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
