VITALife™ Hang-On Back Power Filter

Specifications：

UTC Modular Canister Filter w/ UV Sterilizer

VITALife™ M200 Model Adjustable surface skimmer

Filtration system is mechanical, chemical and biological Quiet and efficient Ideal for use in both fresh and saltwater aquarium Includes easy to change filter cartridge Adjustable flow control Water first flow through the mechanical filter-removes large debris → carbon-removes odor and discoloration → biological filter cartridge- which provides large amount of surface area for beneficial bacteria to cultivate and breakdown organics

• Models：
  

  Item No. Description UPC No. SWM 118 VitaLife™ Hang-On Power Filter M100 006903715263 SWM 180 VitaLife™ Hang-On Power Filter M200 006903715270

• Parts：

  Biological filter Mechanical/chemical filter

• Installation：

  1. Place the VITALife™ Hang-On Back Filter on the back of the aquarium
  2. Insert filter into the unit
  3. Fill the unit with water from the aquarium
  4. Place the filter lid on the unit
  5. Plug the VITALife™ Hang-On Back Filter system into the GFCI electrical outlet using a drip loop
  6. Check for any leaks

• Maintenance：FILTER CARTRIDGES (every 3 – 4 weeks)
  

  1. Remove the filter cartridge and replace
  2. Bio-grid does not need to be replaced. Clean with aquarium water and place back into the filter. Do not clean with tap water as this will kill beneficial bacteria

  IMPELLER (every month)

  1. Remove the filter from the aquarium
  2. Remove water
  3. Remove the pump
  4. Clean the impeller and shaft well
  5. With a small brush clean the inside of the impeller well
  6. Reassemble
  7. Apply a small amount of silicone lubricant to the o-ring and reinstall pump
  8. Follow installation instructions

  INTAKE STRAINER AND INTAKE TUBE

  Remove the intake tube and intake strainer and clean with a bottle brush